Stay connected with the latest success stories from iTEC http://www.incontrol-tech.com Sat, 19 May 2012 15:35:46 +0100 FeedCreator 1.7.2 http://www.incontrol-tech.com/images/M_images/rss091.gif http://www.incontrol-tech.com Stay connected with the latest success stories from iTEC http://www.incontrol-tech.com/index.php?option=com_content&task=view&id=218 PSI-Incontrol organizes two-day training at Hotel Sri Damansara, in Selangor. The workshop entitled “KAIZEN – Continuous Improvement” was held on the 24th and 25th of March 2011. The workshop was done to promote an awareness of KAIZEN concept, or Continuous Improvement into employees of PSI-Incontrol in order to improve the performance of the company in each and every aspect covered. The whole idea of implementing KAIZEN concept into the company came by when it’s realized that the company needs to stay competitive by implementing proper change management plan. The workshop attendees were picked out from each of the Business Units (BUs) and departments in PSI-Incontrol office. Naming the group of attendees as Creative Action Team (CAT), they will be responsible in promoting the KAIZEN concept to each BUs and departments in the future. The whole course was tailored to suit to PSI-Incontrol’s needs by Lt Col (Rtd) Mohan Singh Rendhawa who is also the Main Facilitator of the programme. News Zone - News Wed, 25 May 2011 15:13:27 +0100 http://www.incontrol-tech.com/index.php?option=com_content&task=view&id=217 What is the most important aspect while upgrading a Real-Time System? It is to maintain it as Real-Time as possible with no downtime. Especially for a SCADA system which monitors controls the financial network of a country like Malaysia. TNB with an objective to add a Backup Control Centre to its existing Metro SCADA, entrusted iTEC with the Metro Upgrade project. The project involved implementing a new Backup Control Centre and upgrading its existing Metro SCADA System. iTEC recently upgraded the SCADA system for Tenaga Nasional Berhad’s Metro region comprising of the city of Kuala Lumpur, federal territory of Wilayah Selangor state with the feather in its cap being achieving this mission critical task with ZERO downtime and ensuring the system is ‘Realtime’ at all the times. News Zone - News Thu, 12 May 2011 12:04:09 +0100 http://www.incontrol-tech.com/index.php?option=com_content&task=view&id=216 The year had been moving in the fast lane entering second quarter of 2011 in the short nick of time. Recently, PSI-Incontrol has just completed the Factory Acceptance Test (FAT) session for an order from Tenaga Nasional Berhad (TNB), Northern Region. The project which involves 4 different substations, 275/132kV Perlis Power Station (PLPS), 132kV Teluk Apau Substation (TPAU), 132/11kV Kuala Perlis Substation (KPLS) and 132/33kV Teluk Ewa Substation (TEWA) supplies Control and Protection Relays and Panels. The testing session which took 2-days again witnessed a fantastic “ZERO ERROR” all along the testing stages. TNB’s QA/QC Inspector who witnessed the testing commented that PSI-Incontrol products are of the best quality and it’s definitely the brand that has been trusted in the industry without any doubts. News Zone - News Thu, 12 May 2011 10:39:13 +0100 http://www.incontrol-tech.com/index.php?option=com_content&task=view&id=215 Grid calculations for the operation of the 380/220 kilovolt transmission network PSI AG has been contracted by the 50Hertz Transmission GmbH with the delivery of grid calculation functions for the 380/220 kilovolt transmission network in northern and eastern Germany. On the basis of the PSIcontrol control system, PSI will provide functions for the support of the network operations with the dramatically increasing decentralised input of renewable energies. These functions will initially be coupled through interfaces with the control system which 50Hertz has used to date. 50Hertz Transmission is responsible for the operation, maintenance, planning, and expansion of the 380/220 kilovolt transmission grid throughout the northern and eastern part of Germany. The grid covers an area of 109,000 km2 and is about 9,750 km long. It secures the network integration of approximately half of all the wind-generated power in Germany. News Zone - News Thu, 12 May 2011 09:44:19 +0100 http://www.incontrol-tech.com/index.php?option=com_content&task=view&id=214 - New orders increase by 20 % to 54 million Euros- Group sales increase by 4 % to 38.8 million Euros- EBIT increases by 19 % to 2.1 million EurosThe PSI Group increased its EBIT by 19 % to 2.1 million Euros in the first quarter of 2011 (31 March 2010: 1.8 million Euros). Its group net earnings after interest and taxes were, at 1.4 million Euros, 21 % above the value for the previous year (31 March 2010: 1.2 million Euros). Group sales increased by 4 % to 38.8 million Euros (31 March 2010: 37.1 million Euros). New orders increased compared to the previous year by 20 % to 54 million Euros (31 March 2010: 45 million Euros).Energy Management (electricity, gas, oil, heat) achieved 3 % higher sales of 16 million Euros in the first quarter (31 March 2010: 15.5 million Euros). The EBIT for the segment was 1.5 million Euros, as in the previous year. The gas and oil business continued its good development from the previous year and again obtained important follow-up contracts in Russia. The electrical energy business continued to invest in functions for the intelligent grid control and obtained an important new customer in the German market. News Zone - News Wed, 27 Apr 2011 22:22:49 +0100 http://www.incontrol-tech.com/index.php?option=com_content&task=view&id=213 Berlin, 15 March 2011 – PSI Group had 8% higher sales of 158.7 million Euros in financial year 2010 (2009: 147 million Euros). The EBIT increased by 22% to 9.5 million Euros (2009: 7.8 million Euros). The Group net result increased by only 6% to 7.0 million Euros (2009: 6.6 million Euros) as a result of higher taxes. The volume of new orders improved by 18% to 177 million Euros, the order backlog increased by 11% to 108 million Euros (2009 97 million Euros).The Energy Management business increased its sales in 2010 by 10% to 65.5 million Euros (2009: 59.8 million Euros). The EBIT increased to 4.7 million Euros (2009: 4.3 million Euros). While the contribution from the gas and oil segment again developed above budget, the result from electrical energy is still being burdened by pilot and export projects. The energy trading systems segment continued to recover, despite the costs for the migration to the group technology platform. News Zone - News Wed, 16 Mar 2011 17:06:14 +0100 http://www.incontrol-tech.com/index.php?option=com_content&task=view&id=212 22nd January 2011 marks another astounding milestone in iTEC history with the successful commissioning of the protection system for 275kV GIS Salak South substation.. The project which is parked under Tenaga Nasional Berhad (TNB) Asset Development – Major Projects has been awarded to Transmission Technology Sdn Bhd who later awards the scope of supplying the control and protection system panels to iTEC. News Zone - News Mon, 14 Mar 2011 09:16:25 +0100 http://www.incontrol-tech.com/index.php?option=com_content&task=view&id=211 8th February 2011 - A date to be remembered as the iTEC family in Kuala Lumpur, Malaysia bids farewell to Mr Bauer from PSI EE and Mr Ravi from iTEC Bangkok. A small lunch gathering was organized by iTEC Kuala Lumpur’s office to bid farewell to both of them.Michael Christian Bauer had started his career with PSI and spent almost 40 years with PSI. He will indeed be leaving a legacy to the new generations of PSI. Holding the position as Director of PSI Energy and Representative in South East Asia, he has always displayed great enthusiasm with his job. There was no problem too small to escape his attention. He was always ever ready to take up all of the challenges and ensured that everything fell into its place perfectly. Mr Bauer, after retirement, will be residing in his home country, Germany. Commenting on the farewell party, “First of all very many and hearty thanks to all of you for the unforgettable meetings in KUL as in BKK. You made such an great effort to make me feel like in paradise. It simply was great”. News Zone - News Tue, 08 Mar 2011 15:02:35 +0100 http://www.incontrol-tech.com/index.php?option=com_content&task=view&id=210 Berlin, 21 February 2011 – According to preliminary calculations, the PSI Group increased its EBIT in 2010 by 22% to 9.5 million Euros (2009: 7.8 million Euros). The EBITDA was also increased by 22% to 13.9 million Euros (2009: 11.4 million Euros). Group sales grew by 8% to more than 158 million Euros (2009: 147 million Euros), the volume of new orders improved by 18% to 177 million Euros (2009: 150 million Euros).In 2010, PSI has exceeded the peak of the investments into near shoring and the new, uniform technology and started the rollout in the Group’s vertical target markets. Results were also burdened by the development of new export versions and the control system for mining. About 40% more than in previous years was invested in research and development of software and processes that will make energy networks and industrial solutions much more energy- and resource-efficient. The export percentage of the new orders already passed the 50% mark in 2010. News Zone - News Wed, 02 Mar 2011 10:34:00 +0100 http://www.incontrol-tech.com/index.php?option=com_content&task=view&id=209 iTEC starts 2011 with another successful Factory Acceptance Test (FAT) for the control and protection panels for project Pasak and Tg Langsat substation. iTEC, being one of the leaders in Substation Control and Protection system, was entrusted by Multi-Discovery Sdn Bhd to design, develop and complete the scope of supplying new current differential system in the substation. The testing which was completed within a day was witnessed by a TNB Research’s QA/QC Inspector. A short interview with the project team noted that there were no comments or non-compliances recorded for the FAT session. That fits well into iTEC’s “ZERO ERROR” plan. “This project is the first one that I handled beginning from day one. I would like to take the opportunity here to thank all members of iTEC family for the continuous support, both technical-wise and moral-wise. I look forward to the next step of the project, when we will install and retrofit the relays at site. It will be something really special, to see the result after all the hard works done, it really paid off. iTEC, we did it again”. News Zone - News Thu, 17 Feb 2011 18:11:29 +0100 http://www.incontrol-tech.com/index.php?option=com_content&task=view&id=208 Taking a huge leap forward, iTEC has completed the Design Manager (DM) Training Series for the Corporate Geospatial Information Systems (CGIS) project, on the 3rd of January 2011. The DM training module that is carefully studied and prepared beforehand is specially designated for Tenaga Nasional Berhad’s (TNB) Distribution Division personnel who will be using the CGIS system to add, edit and update TNB’s assets throughout the coverage area of the metro region (Selangor, Federal Territory of Kuala Lumpur and Putrajaya). The training was especially tough as it had to cater to more than 90 non-english speaking digitizers. News Zone - News Thu, 17 Feb 2011 17:52:28 +0100 http://www.incontrol-tech.com/index.php?option=com_content&task=view&id=207 Expansion of activities in the North American market PSI founded PSI Metals North America at the beginning of 2011 and, consequently, has strengthened their activities in the North American market. The new company will support PSI customers in Canada and the USA from its location in Pittsburgh and at the same time strengthens sales activities in North America. The focus of PSI Metals North America is first and foremost in the field of metals production where PSI is represented in North America with customers such as ArcelorMittal Dofasco, U.S. Steel, AK Steel, Severstal North America, ThyssenKrupp Stainless USA and Vallourec. In the medium term, PSI will be using the new subsidiary for the entry into other fields of business in the American market. The PSI Group has been able to consistently expand its export in recent years and currently has 16 of the 20 largest steel producers as customers. News Zone - News Wed, 09 Feb 2011 12:00:30 +0100 http://www.incontrol-tech.com/index.php?option=com_content&task=view&id=206 Muscat Electricity Distribution Company SAOC (MEDC) decides for PSIcontrol PSI AG group company PSI Incontrol, Malaysia has, for the first time, been awarded by MEDC thro’ a local consortium partner in Oman with the delivery of a centralized Network Control SCADA system, remote telemetry automation, transmission and distribution communication for the entire Medium voltage grid (33 kV / 11 kV) in the Sultanate of Oman capital city of Muscat. On the basis of the PSIcontrol SCADA system, it is planned to establish a Main control center, a Back-up control center, remote telemetry automation and telecommunication systems in over 157 electrical sub-stations. The total project implementation period is 36 months. PSI Incontrol will connect all the existing 33/11kV network substations of MEDC to PSIcontrol SCADA system during this project phase. During the next phase, Network Control SCADA system would be enhanced/upgraded with additional DMS functionalities and remote telemetry automation for 11kV Substations. News Zone - News Thu, 20 Jan 2011 16:24:41 +0100 http://www.incontrol-tech.com/index.php?option=com_content&task=view&id=205 As we all close say good bye to the year 2010 in various ways, iTEC concluded it with yet another milestone achievement – Successful completion of the Factory Acceptance Test (FAT) for the Pasir Gudang Town Centre (PGTC) its remote end Pasir Gudang Darat (PGDT) Control Relay Panels. This milestone, which was achieved by one of our junior iTEC family members, is just another point driving home the fact that we hold strong to our motto of “Building Partnership Through Empowered People”. iTEC engineers are groomed to be independent re-write success stories like never before. We congratulate the team for closing the project at the dawn of 2010 – 31st Dec 2010 leading the pathway to 2011 with a triumph.Our clients Tenaga Nasional Berhad’s, Transmission Divisions, Asset Development Department (Southern Region) had entrusted us with the task of supplying the 57 various panels required for this project including Metering, Remote Tap Control Charger, Protection Control Relay panels, and also marshaling kiosks. The preliminary testing and wiring check was witnessed and carried out by personnel from TNB’s Engineering Department followed by a QA/QC inspector from TNB Research subsidy. News Zone - News Wed, 19 Jan 2011 11:38:43 +0100 http://www.incontrol-tech.com/index.php?option=com_content&task=view&id=203 ERP specialist integrates manufacturing execution systems business Effective 1 January 2011, Berlin PSIPENTA Software Systems GmbH took over the manufacturing execution systems (MES) business of the PSI Production GmbH. Both companies are wholly owned subsidiaries of the PSI AG. With the shareholder resolution of 1 October 2010, the MES business of PSI Production GmbH, with all its employees and current contracts, was integrated into PSIPENTA. The two companies had already successfully completed numerous joint customer projects in the past. With the merger, PSIPENTA provides both small and medium-sized companies as well as large corporations with an extensive offer for the implementation of integrated ERP/MES software solutions. News Zone - News Fri, 14 Jan 2011 11:06:15 +0100 http://www.incontrol-tech.com/index.php?option=com_content&task=view&id=202 Use of PSImetals at the Youngstown plant in Ohio PSI was commissioned by Vallourec, a world leader of premium tubular solutions, with the delivery of PSImetals as the Manufacturing Execution System (MES) for the new small diameter rolling mill at the Youngstown plant in Ohio, USA. . Vallourec is already successfully using PSImetals at plants in Europe, South America and, with the new project, also in North America in the future. At the Youngstown plant, Vallourec is building a new state of the art small diameter rolling mill to support the anticipated increase in demand for seamless tubes that is associated with the expansion of the natural gas market in the USA. News Zone - News Wed, 01 Dec 2010 08:03:35 +0100 http://www.incontrol-tech.com/index.php?option=com_content&task=view&id=201 PSI has been awarded by the Gazprom subsidiary OJSC “Gazavtomatika“ OJSC “Gazprom“ a contract to deliver the software for the control system of the Baidaratskaya compressor station. This strategically important order represents the kick-off for other planned control systems for the Gazprom Bovanenko-Uchta gas pipeline and the northern European gas transport trunk line (Nord Stream onshore). With the use of PSIcontrol V7, Gazprom intends to develop highly efficient, hierarchically structured control systems for the control of gas transportation in strategically important gas transportation pipelines. Concrete work is being performed in particular for the gas transportation pipeline Bovanenko–Uchta–Torshok and the northern European gas transport line (Nord Stream onshore). PSIcontrol V7 is planned for both the realisation of cross-pipeline dispatching centers as well as for the local control system levels below them. The Baidaratskaya compressor station is part of the Bovanenko line. News Zone - News Sat, 20 Nov 2010 21:36:49 +0100 http://www.incontrol-tech.com/index.php?option=com_content&task=view&id=200 In another successful step forward, inCONTROL Tech ( iTEC ) and its partner PSI delivered a complete state of art PSI EE-SCADA Control System to RWANDA’s power utility called Rwanda Electricity Company (RECO). RECO is responsible for electricity production and supply in Rwanda. This control system which is being located at the Gikondo Substation is currently undergoing site commissioning. Once this substation has been fully commissioned it will be linked to another thirty three substations all over Rwanda. News Zone - News Fri, 27 Aug 2010 14:41:15 +0100 http://www.incontrol-tech.com/index.php?option=com_content&task=view&id=199 inCONTROL Tech (iTEC) was recently invited to share its expertise on the Smart Grid technology during a two days Electricity Innovation Smart Grid Conference in Seoul Korea. This conference was organized by Magenta Global, a Singaporean based company. It was held at Renaissance Seoul Hotel in Seoul Korea from the 27th to 28th July 2010. News Zone - News Mon, 09 Aug 2010 14:33:30 +0100 http://www.incontrol-tech.com/index.php?option=com_content&task=view&id=198 inCONTROL Tech ( iTEC) recently made a two day landing at the Eagle Ranch in Port Dickson. This highly motivated team building session was held on the 7th and 8th of May. The objectives of this workshop were to provide a platform for the Head of Departments (HOD) to improve their interpersonal communication. This could only be achieved by having a good understanding of their most preferred thinking style and knowing the preferred thinking style of their other members of the team. As a result of this exposure the HOD’s would develop a strong synergy in their workplace. News Zone - News Fri, 02 Jul 2010 21:49:23 +0100 http://www.incontrol-tech.com/index.php?option=com_content&task=view&id=197 New network control system for a secure railway electrical supplyPSI AG has been awarded the contract to provide the Swiss federal railway SBB with an energy management system (EMS) and a traction current control system (TCCS). The basis of both systems is the PSIcontrol technology from PSI. The EMS is planned to go into operation in early 2013, the TCCS by October 2013. The existing systems will have reached the end of their economic lifespan at that time. The new systems are necessary to support the secure supply of electricity for the Swiss railway in the future. The project volume awarded to PSI is about 10 million Euros.The new energy management system (EMS) regulates, optimises and monitors the energy production and transmission on its path from the power plant to the feed-in to the overhead line system. The traction current control system (TCCS) controls and monitors the overhead line system along the railway lines. News Zone - News Tue, 29 Jun 2010 15:46:10 +0100 http://www.incontrol-tech.com/index.php?option=com_content&task=view&id=196 Wien Energie decides for PSIcontrol PSI AG has, for the first time, been contracted by Wien Energie with the delivery of a network control system for the high and medium voltage grid (380kV, 110 kV, 20 kV, 10 kV) in the Austrian capital of Vienna and some of the surrounding communities in the State of Lower Austria. On the basis of the PSIcontrol control system, it is planned to establish a central control station, a back-up control station, mobile workplaces and an additional offline working place. The system will replace one provided by a competitor for a total of 41 transformer stations and substations. The system includes the management of the transformer stations and the medium-voltage grid with more than 10,000 substations and about 235,000 grid connections and will also include an emergency working place for the existing load dispatching centre. PSI will connect the existing network substations to PSIcontrol and transfer data from the preceding system. News Zone - News Thu, 10 Jun 2010 15:05:17 +0100 http://www.incontrol-tech.com/index.php?option=com_content&task=view&id=194 inCONTROL Tech (iTEC) achieved another success after commissioning the Salak South 275kV Remote End Stations Feeder protection panels. iTEC was put to task to upgrade the existing protection systems with the latest numerical protection relays used for substation Protection and control system. News Zone - News Tue, 01 Jun 2010 08:54:04 +0100 http://www.incontrol-tech.com/index.php?option=com_content&task=view&id=193 To improve the economic and social growth in East Malaysia, Sabah Electricity Sdn. Bhd. (SESB) had engaged the expertise from inCONTROL Tech (iTEC) to design and implement their new transmission and distribution faculty to support the blooming Palm Oil Industrial Cluster (POIC) within the vicinity of Lahad Datu, Sabah. News Zone - News Mon, 24 May 2010 11:02:50 +0100 http://www.incontrol-tech.com/index.php?option=com_content&task=view&id=192 inCONTROL Tech also known as iTEC’s had their family outing this year at FRIM or Forest Research Institute of Malaysia. This recreation park is a must for all nature lovers who are in the capital city of Kuala Lumpur. It was founded in the early 1929 and is one of the leading institutions in tropical forestry research both locally and abroad. This fully sponsored event was held on the 27th of March and was attended by about 100 employees and their family members. News Zone - News Wed, 19 May 2010 09:49:53 +0100 http://www.incontrol-tech.com/index.php?option=com_content&task=view&id=191 In another major step forward, inCONTROL Tech (iTEC) had successfully completed the Factory Acceptance Test (FAT) for the SCADA/EM System designed for Electrogaz/RECO. The Government of Rwanda’s has been putting a lot of effort to boost and achieve their socio-economic development plan for their citizens. Electrogaz/RECO (Rwandan Energy Utility) has been given the mandate to implement a electrical network control system (SCADA/EMS). News Zone - News Mon, 17 May 2010 12:07:40 +0100 http://www.incontrol-tech.com/index.php?option=com_content&task=view&id=190 PSI subsidiary inCONTROL Tech (iTEC) has been awarded the contract to supply the communication package on a turnkey basis for works related to the Double-Track Railway Project between Seremban and Gemas. This project is part of a major initiative by the Malaysian government to upgrade the railway infrastructure in order to offer a safe, more reliable and efficient mode of transportation. News Zone - News Mon, 03 May 2010 17:42:08 +0100 http://www.incontrol-tech.com/index.php?option=com_content&task=view&id=189 inCONTROL Tech (iTEC) is proud to announce the appointment of Mr. Ir. Teh Ah Kau an expert from the power industry into our organization. With his vast experience over the years, iTEC will be able to study and develop better solutions for the growing needs in the power industry in this country. Mr. Ir. Teh Ah Kau is a Registered Professional Engineer with the Board of Engineers, Malaysia and also a Member of the Institution of Engineers, Malaysia. He had worked with Tenaga Nasional Berhad (previously known as National Electricity Board of Malaysia) for over 33 years in various engineering departments, supervisory and management levels until his retirement in mid 2007. His last position was the General Manager for National Control Center in the Transmission Division. News Zone - News Fri, 16 Apr 2010 18:09:23 +0100 http://www.incontrol-tech.com/index.php?option=com_content&task=view&id=188 inCONTROL Tech (iTEC) is proud to announce the appointment of Mr. Ng Bon Leong an expert from the power industry into our organization. With his vast experience over the years, iTEC will be able to study and develop better solutions for the growing needs in the power industry in this country. Mr. Ng Bon Leong had obtained his Electrical Engineering qualification from the University of Auckland back in 1974. During the early days start of his working career Mr. Ng Bon Leong had worked as assistant distribution engineer in Penang and Alor Star. Besides that he had also worked as an electrical maintenance engineer in the Sultan Yussuf Hydro Power Station. News Zone - News Fri, 16 Apr 2010 17:50:09 +0100 http://www.incontrol-tech.com/index.php?option=com_content&task=view&id=186 inControl tech (iTEC) recently conducted a three weeks comprehensive in-house training for the TNB Distribution and TNB Research engineers. TNB is the National Utility of Malaysia and operates a vast grid of substations from 11kV till 500kV. This training was held at iTEC’s head office Training facility situated in Kuala Lumpur, Malaysia. News Zone - News Tue, 13 Apr 2010 23:22:27 +0100 http://www.incontrol-tech.com/index.php?option=com_content&task=view&id=185 inCONTROL Tech (iTEC) recently conducted a two weeks long in-house training for the TNB Transmission and Telecontrol engineers. TNB is the National Utility of Malaysia and operates a vast grid of substations from 11kV till 500kV. This training was conducted in iTEC’s head office in Kuala Lumpur, Malaysia. iTEC’s Senior Systems Engineer, Arminder Singh together with Gurdarshan Singh help the client engineers understand the configuration, communication and operation of the Substation HMI . News Zone - News Thu, 01 Apr 2010 14:04:32 +0100 http://www.incontrol-tech.com/index.php?option=com_content&task=view&id=184 In another major step forward, inCONTROL Tech (iTEC), successfully completed the design and development of the Onboard Communication and Passenger Information System for the Mumbai Monorail Project. The Factory Acceptance Test (FAT) was completed successfully and witnessed by the SCOMI engineering team. Scomi is one of the leading Monorail Manufacturers in the world. News Zone - News Mon, 22 Mar 2010 22:22:12 +0100 http://www.incontrol-tech.com/index.php?option=com_content&task=view&id=183 inCONTROL TECH (iTEC) successfully passed the Factory Acceptance Test (FAT) recently for TNB’s IEC 61850 Lab Project .The IEC 61850 standard is the latest standard around the world for substation automation. Many utilities are now incorporating this latest engineering standard into their newly build systems. News Zone - News Mon, 22 Mar 2010 11:45:04 +0100 http://www.incontrol-tech.com/index.php?option=com_content&task=view&id=182 InCONTROL Tech (iTEC) recently conducted a two days Productivity Workshop on the 5S Techniques on the 3rd 4th of March 2010. This training held at the FMM Institute was attended by representatives from various departments in the organization. The training focused on various methods of implementing these techniques within the departments in the organization. 5S is a Japanese technique that results in a well-organized workplace complete with visual controls and order. News Zone - News Thu, 18 Mar 2010 11:45:24 +0100 http://www.incontrol-tech.com/index.php?option=com_content&task=view&id=181 inCONTROL Tech (iTEC), recently attended a joint annual dinner hosted by MNC-CIGRE and CIRED Malaysia on the 5th February 2010. The dinner themed 1Malaysia was organized at PJ Hilton. Present to officiate this event was Tenaga Nasional Bhd (TNB) CEO Datuk Seri Che Khalib Mohamad Noh. CIGRE (Conseil International Des Grands Reseaux Electriques) and CIRED (Congress International des Reseaux Electriques de Distribution) are 2 international groups focusing on the power industry. News Zone - News Fri, 05 Mar 2010 14:31:37 +0100 http://www.incontrol-tech.com/index.php?option=com_content&task=view&id=180 inCONTROL Tech (iTEC) successfully commissioned Sabah Electricity Sdn Bhd (SESB) first integrated IEC 61850 based substation located at Gayang, Sabah. The IEC 61850 system includes Communication based Protection, Control Substation Automation System (SAS). News Zone - News Thu, 25 Feb 2010 08:45:59 +0100 http://www.incontrol-tech.com/index.php?option=com_content&task=view&id=179 inCONTROL Tech (iTEC) recently had the engineering team of Tenaga Nasional Berhad “Distribution” (TNBD) present for a factory visit at our main office in Malaysia. This visit had participants comprising senior management staffs from both TNBD and iTEC. Part of this visit was to create a good working culture between the two organizations and therefore improving communications and knowledge sharing for the future. News Zone - News Thu, 25 Feb 2010 08:04:46 +0100 http://www.incontrol-tech.com/index.php?option=com_content&task=view&id=169 inCONTROL Tech (iTEC) recently conducted a team building intercultural competence workshop to build good working relationship between its subsidiaries. This workshop which was held at Bangkok had active participation from PSI, iTEC Bangkok and the SCADA team from Kuala Lumpur. Objectives of this workshop were to develop the ability to work efficiently between cultures through proper understanding, communication and working styles. News Zone - News Wed, 03 Feb 2010 21:47:02 +0100 http://www.incontrol-tech.com/index.php?option=com_content&task=view&id=168 Cellls GmbH provides solutions for business customers and social communitiesPSI has established the Cellls GmbH, a specialist for the development, sale and operation of mobile communications services as a wholly-owned subsidiary of the PSI Transcom GmbH. The Cellls GmbH addresses nationally and internationally operating companies in the fields of logistics, transportation and security, police and fire departments, operators of private mobile radio and trunked radio networks and all types of social communities.The product range of Cellls GmbH includes the products PushToTalk, MessageRoute, a platform for Location Based Services and the new product Cellls. PushToTalk offers as a substitute for walkie-talkie and trunked radio products advantages in terms of flexibility, operating costs and other features such as tracking. MessageRouting is a bridge between Internet and any mobile messages, the location-based services platform provides a basis for sales and operation of telematics and track trace solutions. The new product Cellls is tailored to the consumer market as solution for ad-hoc conferences in any social communities. News Zone - News Wed, 03 Feb 2010 08:34:30 +0100 http://www.incontrol-tech.com/index.php?option=com_content&task=view&id=167 inCONTROL Tech known as iTEC , had successfully carried out a New Year’s gift exchange programme. This event was organized to promote cultural diversity among its employees. Employees are encouraged to work effectively on mutual goals and objectives through teamwork. iTEC currently employs nationalities from various countries working in the organization. News Zone - News Thu, 21 Jan 2010 10:17:16 +0100 http://www.incontrol-tech.com/index.php?option=com_content&task=view&id=166 Staggeringly vast and a land of great diversity, China, the world's most populous and third largest nation is more like a continent in itself than a country. This was the country chosen for inCONTROL Tech’s Company Trip for 2009. The prime highlight of this trip was Shanghai, which is also referred to as the 'Paris of the Orient’, is China's commercial and financial centre. Its modern, international and fashionable reputation entice travelers and visitors from all over the world, who come to delight in its shopping heavens and wide variety of entertainment or simply to experience the glitz of China's most cosmopolitan city. News Zone - News Mon, 21 Dec 2009 15:10:20 +0100 http://www.incontrol-tech.com/index.php?option=com_content&task=view&id=165 The overall objective of inCONTROL Tech’s Transfer of Technology Knowledge (ToTK) plan for TNB is to ensure TNB’s project team is self-sufficient in maintaining developing the CGIS system. inCONTROL Tech’s methodology to achieve the mentioned object is to deliver execute a comprehensive transfer of technology knowledge (ToTK) plan. In October 2009, CGIS Project Team Members have undergone the initial training session on Electric Office (EO), a module dedicated for Electric Utility like TNB, as part of its Transfer of Technology Knowledge (ToTK) Program. News Zone - News Wed, 16 Dec 2009 17:08:44 +0100 http://www.incontrol-tech.com/index.php?option=com_content&task=view&id=164 inCONTROL Tech successfully certifies itself to the ISO 9001:2008 standards. The ISO 9001:2008 Standards provides a tried and tested framework for taking a systematic approach to managing the organizations processes so that they consistently turn out products that satisfies customer’s expectations. ISO 9001:2008 contains no new requirements compared to the ISO 9001:2000 Standards edition, which it replaced. News Zone - News Thu, 10 Dec 2009 16:34:45 +0100 http://www.incontrol-tech.com/index.php?option=com_content&task=view&id=163 inCONTROL Tech had successfully commissioned the SCADA System for the Extension of Baddegama Group Water Supply Plant Project. This water treatment plant which is located at Baddegama, Sri Lanka will be then managed and operated by the National Water Supply and Drainage Board of Sri Lanka. The new water treatment plant which is designed to increase the daily production capacity and with additional water supply channeled to the new reservoirs located at Ambalagoda, Batapola, Kosgoda, Galagoda, Gonapinuwala, Hikkaduwa for subsequence water distribution. News Zone - News Wed, 09 Dec 2009 16:41:30 +0100 http://www.incontrol-tech.com/index.php?option=com_content&task=view&id=162 inCONTROL Tech had successfully conducted a five day in-house class room training for Sabah Electricity Sdn. Bhd (SESB) engineers on the various types of protection relays, consisting of SCS, HMI and SIMS (Sub-station Interrogation and Monitoring System) together with the new technology of the IEC 61850.The protection relays are being supplied by Areva, ABB Siemens meanwhile the SCS, HMI and SIMS along with the new technology of the IEC 61850 solution is being utilized by inCONTROL Tech in various projects. News Zone - News Wed, 02 Dec 2009 18:06:53 +0100 http://www.incontrol-tech.com/index.php?option=com_content&task=view&id=161 InCONTROL Tech achieved another great success after the Transmission Engineering Department of Tenaga National Berhad (TNB) endorsed the Nari-Relay (NR) RCS 915 Low Impedance Busbar Protection Relay as an approved relay for applications used in TNB's electrical system up to 500 KV.The RCS 915 Relay is a numerical protection system mainly used for main and backup protection of busbars of any application schemes such as single busbar, double busbar and also one and half breaker. According to Mr. Min Yoon, the General Manager of Testing and Product Approval Department in InCONTROL Tech, the RCS 915 went through a very stringent approval checklist by TNBT Engineering department. All these tests were done at the NR testing labs in Nanjing and inCONTROL Tech main headquarters in Sg. Buloh. Mr. Min Yoon added that the RCS 915 performance was excellent during the approval test and complied with all TNB requirements. News Zone - News Wed, 02 Dec 2009 10:24:57 +0100 http://www.incontrol-tech.com/index.php?option=com_content&task=view&id=160 inCONTROL Tech recently passed the Factory Acceptance Test (FAT) for all 132kV Protection and Control panels after diligently ensuring all engineering criteria’s was met as given by the customer’s (TNB) specifications during testing. This substation which is located in the West of Malaysia contains a total of 42 panels engineered using modern numerical Protection and Control systems. News Zone - News Mon, 30 Nov 2009 10:28:48 +0100 http://www.incontrol-tech.com/index.php?option=com_content&task=view&id=159 A one day Introduction Seminar on Nari-Relays (NR) Protection Relays, organized by INCONTROL TECH, Thailand Branch, was held at Provincial Electricity Authority (PEA)'s Headquarters on the 10th of November 2009. The objective of the seminar was to introduce NR Protection Relays to PEA Engineers.In view of PEA’s prime commitment for continuous improvement to achieve the highest possible level of sufficiency, efficiency and reliability in power distribution the seminar was tailored to help PEA develop and apply modern technology to improve efficiency, reliability and the quality of their electrical supply and services. News Zone - News Fri, 20 Nov 2009 08:43:15 +0100 http://www.incontrol-tech.com/index.php?option=com_content&task=view&id=158 Geospatial (or Geographic) Information Systems (GIS) have been around for decades in various forms. Many utilities around the world have successfully implemented GIS solutions. With an aim to improve operational efficiency reduce operational costs, TNB has a vision for its “Corporate Geospatial Information System (CGIS)” project. News Zone - News Wed, 18 Nov 2009 16:55:08 +0100 http://www.incontrol-tech.com/index.php?option=com_content&task=view&id=157 InCONTROL Tech was recently invited to share its expertise in the field of Automation and Protection Relay at the International Protection Testing Symposium (IPTS) held in Vienna, the historical capital city of Austria. The premise of the former Stock Exchange and the Palais Daun-Kinsky was chosen due to its unique surroundings. News Zone - News Tue, 03 Nov 2009 10:13:19 +0100 http://www.incontrol-tech.com/index.php?option=com_content&task=view&id=155 inCONTROL Tech has successful completed the Factory Acceptance Test (FAT) for the first Data Acquisition and Control (DAC) Simulator to be delivered to PEA. This is the part of the seven SCADA/DMS control systems which were ordered from iTEC/PSI and will be used as Area Distribution Dispatching Center (ADDC) by Provincial Electricity Authority (PEA) throughout Thailand. News Zone - News Wed, 28 Oct 2009 23:48:15 +0100 http://www.incontrol-tech.com/index.php?option=com_content&task=view&id=156 Good water management constitutes a major challenge and calls for integrated and holistic planning. Many aspects have to be considered in order to respond to changes in natural phenomena, increases in water demand and water stresses. iTEC’s state-of-the –art solutions for early warning systems, sophisticated databases, GIS and software interfaces with comprehensive visualization techniques, scalability and configurable solutions greatly enhances the water manager’s decisions. News Zone - News Thu, 29 Oct 2009 00:00:45 +0100 http://www.incontrol-tech.com/index.php?option=com_content&task=view&id=154 A two days Technical Workshop on the NR Protection Relays, organized by INCONTROL TECH, was held at the Holiday Inn in Melaka from 6th to 7th October 2009. The objective of the workshop is to introduce approved NR relays to the end users in TNB. The workshop brought together around twenty protection engineers from regional asset maintenance, asset management, and engineering department in TNB Transmission and TNB Distribution. The workshop program included theory and practical training on four TNB approved relays. News Zone - News Mon, 12 Oct 2009 10:24:57 +0100 http://www.incontrol-tech.com/index.php?option=com_content&task=view&id=153 inCONTROL Tech had successfully passed the Factory Acceptance Test (FAT) for all 275/132kV panels used for Sg. Mati Substation. This substation which is located in Muar, Johor would serve as an enhanced reactive circulating current principle which is used by the Micro TAPP AVR relays for control of tap changer mechanism. This method of control reduces the circulating of current and allows dissimilar transformers to operate in parallel environments regardless of the rating, impedance or tap changer mode. News Zone - News Thu, 08 Oct 2009 17:10:52 +0100 http://www.incontrol-tech.com/index.php?option=com_content&task=view&id=152 PMU ABBA 33/11 kV substation supplies power to the main administrative centre of the Malaysian Government in Putrajaya.The substation protection relays and supervisory control via the SCADA was awarded to inCONTROL TECH (iTEC), as part of TNB's upgrade exercise, . Being a “live” substation, this upgrading work involved a few phases of shutdowns to allow iTEC engineers to replace the obsolete protection, install the new fibre optical cables and IEC 61850 switches. Finally, the commission of the gateway to allow SCADA control from the advance Metro Regional Control Centre (MRCC) in TNB HQ at Bangsar was achieved. News Zone - News Wed, 07 Oct 2009 10:39:56 +0100 http://www.incontrol-tech.com/index.php?option=com_content&task=view&id=149 As part of the ongoing efforts of iTEC to further improve engineering quality and standards, there was a two day engineering workshop held in the iTEC Chennai office. iTEC's commitment to quality and best engineering practices is translated into action plans through such meetings. News Zone - News Wed, 08 Jul 2009 08:37:16 +0100 http://www.incontrol-tech.com/index.php?option=com_content&task=view&id=148 30 June (Bloomberg) PSI AG shareholder Harvinder Singh, who owns 16.6 percent of the German software maker, said he wants to help win orders in Asia, India and the Middle East as PSI seeks to lift sales by more than 50 percent in three years. Harvinder gained the stake after selling his company, inControl Tech Sdn Bhd, to Berlin-based PSI in May. Both companies specialize in software control systems and automation for energy, infrastructure and industrial companies. “The PSI footprint will grow very significantly in the so- called developing Asian markets as well as the Middle East,” Harvinder said in an interview in Berlin. “We understand the clients, we are in the territory, we have a multinational team and that helps to bridge that gap.” News Zone - News Thu, 02 Jul 2009 15:30:47 +0100 http://www.incontrol-tech.com/index.php?option=com_content&task=view&id=147 InCONTROL TECH recently participated in an Advanced Training for RTU560 conducted for the Engineering Department. This latest RTU560 technology is well suited across a wide range of applications. The RTU560 is highly scalable and expandable. News Zone - News Tue, 30 Jun 2009 20:19:22 +0100 http://www.incontrol-tech.com/index.php?option=com_content&task=view&id=146 Aschaffenburg 17th June 2009 - As part of the merger exercise, key management from InCONTROL TECH ( iTEC ) made an official visit to PSI office in Aschaffenburg. The management team which consists of ten senior general managers from iTEC was joined by top managers from PSI EE focused on discussions to accelerate the PSI growth worldwide. iTEC will have a major role to increase the marketing and sales activities in the PSI Group. News Zone - News Sun, 21 Jun 2009 20:13:27 +0100 http://www.incontrol-tech.com/index.php?option=com_content&task=view&id=145 InCONTROL Tech conducted a one day seminar on IEC 68150 for Petronas Carigali Sdn Bhd, KTA Tenaga and KLIACS. This seminar is to introduce IEC 61850 standards to help industry players have a better understanding on the importance of this new technology which is currently at the edge of modern automation solution. iTEC has alot of experience in the automation industry making them market leaders in this new standarts resulting inCONTROL TECH to be the only local vendors which provides a full system integration which is capable to execute IEC 61850 projects with high engineering satisfaction. This new engineering standards further enhances and reinforces InCONTROL TECH's continuous improvement motto and is a validation of the tough measures undertaken by inCONTROL TECH to make a significant mark on the engineering practices in Malaysia and the region. News Zone - News Mon, 08 Jun 2009 14:42:55 +0100 http://www.incontrol-tech.com/index.php?option=com_content&task=view&id=144 Time stands still in this Malayana civilization where ancient man hunted, gathered and built their temple. Now amidst the gigantic ruins are the five elements of fun rides and sights. Wet park, amusement park, twin waterfall sandy beach, natural hot springs and the home to a family of big cats. Yes, this was the gateway chosen by InCONTROL Tech for our family day 2009. Around 230 staff and family members of InCONTROL Tech attended this two day all paid for Family Day retreat . News Zone - News Tue, 02 Jun 2009 09:04:33 +0100 http://www.incontrol-tech.com/index.php?option=com_content&task=view&id=143 InCONTROL Tech conducted a one-day seminar aiming for TNB engineers, as an introduction to have a better understanding in the biggest revolution and technology change happening in the engineering world based on the fundamental principles of the IEC 61850 Standards. News Zone - News Mon, 01 Jun 2009 11:00:46 +0100 http://www.incontrol-tech.com/index.php?option=com_content&task=view&id=141 The official signing of contract with INFOTECH ENTERPRISES LIMITED, the largest GIS implementer in the world, to successfully implement TNB's Corporate Geospatial Information Systems. The signing was done by John Renard, President, and SA Lakshminarayanan, Chief Operating Officer. Mr Harvinder Singh, Managing Director and Mr. Gottfried Zeller, Excecutive Director officiated from inCONTROL side. Mr. Sanjay Krishna of INFOTECH and Mr. P. Krishnan signed as witnesses. News Zone - News Mon, 18 May 2009 15:07:49 +0100 http://www.incontrol-tech.com/index.php?option=com_content&task=view&id=140 InCONTROL TECH had successfully commissioned Kuala Pilah 132/22/11kV Substation. This substation which is located within the surroundings of Seremban would be used to meet utility power demand in the Kuala Pilah region is powered with seven 123kV Control Relay Protection (CRP) in would be used by Tenaga National Berhad (TNB) Asses Maintenance (AM) – Seremban. News Zone - News Mon, 18 May 2009 10:40:15 +0100 http://www.incontrol-tech.com/index.php?option=com_content&task=view&id=139 InCONTROL TECH Sdn Bhd announces the appointment of Datuk (Dr) Ir. Mohd Annas bin Hj. Mohd Nor as the Chairman, International Business. With his vast experience over 3 decades, iTEC will benefit from the networks and goodwill that Datuk has built up over the year. iTEC welcomes Datuk to the team News Zone - News Fri, 08 May 2009 13:53:00 +0100 http://www.incontrol-tech.com/index.php?option=com_content&task=view&id=138 inCONTROL TECH conducts a IEC 61850 Substation Automation System ( SAS ) engineering training for Sabah Electricity Sdn. Bhd (SESB) as part of the SESB's first IEC 61850 communication based substation, Minintod 132/33/11kV substation project News Zone - News Fri, 08 May 2009 12:02:52 +0100 http://www.incontrol-tech.com/index.php?option=com_content&task=view&id=137 inCONTROL Tech had successfully passed the Factory Acceptance Test (FAT) for all 275kv Remote Control Protection panels, 275kv Local control panels for GIS and 275kv SIMS (Station Interrogation and Monitoring System). This station is consisting with two Bus Coupler two Bus Section with Double Bus Bar Systems and Hybrid Feeder Under Ground (OG) and Over Head Line (OHL) 275/132kv Auto Transformers. News Zone - Product Wed, 29 Apr 2009 11:19:40 +0100 http://www.incontrol-tech.com/index.php?option=com_content&task=view&id=136 inCONTROL Tech has once again made another glories success after successfully commissioning PMU Bayan Lepas Substation. This Site Acceptance Test involved a total of two RTCC 132/33kV. The numbers of taps for transformers are 16 taps. But the both are opposite tapping direction.Due to these dissimilarities between the transformers and the OLTC tapping direction, they could not be paralleled using the existing Master-Flower scheme in the particular panels in the substation. inCONTROL Tech had to therefore remove the existing MR MK30 AVR relay and reengineer its wiring to replace the wiring with the Circulating Current principal scheme using MicroTAPP AVR. News Zone - News Tue, 28 Apr 2009 16:46:25 +0100 http://www.incontrol-tech.com/index.php?option=com_content&task=view&id=134 inCONTROL Tech successfully achieved all requirements during Factory Acceptance Test (FAT) for PMU 132/33kV Kajang Estate located at Jalan Semenyih. A dedicated system called Substation Interrogation and Management System (SIMS) has been envisaged for this functionality. The SIMS is required to facilitate access and manipulation of data and parameters from the IEDs, locally (from substation control room) or across TNB Wide Area Network (WAN) from TNB Protection office. News Zone - News Thu, 09 Apr 2009 09:01:56 +0100 http://www.incontrol-tech.com/index.php?option=com_content&task=view&id=133 inControl Tech has successfully bagged the order for the Implementation of Corporate GIS (CGIS) in TNB A major initiative from TNB, this project seeks to integrate all asset information on GIS and to reengineer its business processes to take advantage of the power of GIS. iTEC has been chosen as the successful bidder for the System Integrator based on a very exhaustive tendering and evaluation process that lasted more then 6 months. iTEC tendered for this project with its Partner, GE's Smallworld as the GIS platform.A total of 50 functions have been identified to be integrated through System Oriented Architecture the latest concept which eliminates the clutter of interface programs and provides a registry of all software services available throughout TNB. News Zone - News Mon, 06 Apr 2009 17:44:40 +0100 http://www.incontrol-tech.com/index.php?option=com_content&task=view&id=132 InControl Tech got the privilege to attend ABB RTU560 product training conducted for its Sales and Engineering Department early this month. The purpose of this training was to provide an introduction to the various features, project references of the product and also to familiarize this software to our engineer. A demo unit of the product was used during the training. News Zone - News Thu, 02 Apr 2009 11:55:36 +0100 http://www.incontrol-tech.com/index.php?option=com_content&task=view&id=131 inCONTROL Tech made another achievement by passing all requirements during the Factory Acceptance Test (FAT) for PPU SSU Sunway. This project which was awarded by TAMCO Switchgear consists of 11kV and 33kV Remote Control Panels and Associated Accessories for the following SSU and PPU in Peninsula Malaysia. News Zone - News Tue, 17 Mar 2009 10:01:39 +0100 http://www.incontrol-tech.com/index.php?option=com_content&task=view&id=130 inCONTROL Tech successfully completed another Factory Acceptance Test for Perling Substation. This project which includes 275/132kV Auto Transformers and Overhead line which leads to Gelang Patah Substation. News Zone - News Wed, 11 Mar 2009 10:49:38 +0100 http://www.incontrol-tech.com/index.php?option=com_content&task=view&id=129 inCONTROL Tech made its success at Kg Repah Substation after achieving a successful Site Acceptance Test (SAT). This substation which is supervised under TNB’s Seremban Asset Management (AM) Control serves as the Remote Terminal Unit (RTU) Station for PMU Kg Repah. News Zone - News Wed, 11 Mar 2009 10:39:36 +0100 http://www.incontrol-tech.com/index.php?option=com_content&task=view&id=128 inCONTROL-TECH recently conducted its company wide ISO 9001:2000 awareness talk aimed at reinforcing that all staff are given a proper understanding on ISO processes and procedures. This training also served as a platform in demonstrating our commitment towards service quality and customer satisfaction, as well as continuously improving our Quality Management System and integrating the realities of a fast changing world. News Zone - News Fri, 27 Feb 2009 10:17:22 +0100 http://www.incontrol-tech.com/index.php?option=com_content&task=view&id=126 The first event of the year 2009 organised by inCONTROL TECH was to Bukit Cahaya, Shah Alam. Also known as the The Malaysia Agriculture Park, opened to the Public in 1986 with 1295 hectares of virgin jungle, this is the first and so far the only agro-forestry park in the world. News Zone - News Mon, 23 Feb 2009 11:39:04 +0100 http://www.incontrol-tech.com/index.php?option=com_content&task=view&id=125 inCONTROL TECH successfully deployed their first IEC 61850 based protection and control relays to TNB’s network . This project at Abu Bakar Baginda 132/33/11kV Substation in Putrajaya involved the retrofit of 24bays of 33kV and 11kv switchgear, providing power to the Prime Ministers office and the main administrative building in Putrajaya. News Zone - News Mon, 16 Feb 2009 10:53:59 +0100 http://www.incontrol-tech.com/index.php?option=com_content&task=view&id=124 iTEC successfully completed the Factory Acceptance Test for Kajang Estate Project which was awarded by M/S. Syarikat Mohamad Salin Sdn Bhd.,This project which contains 132 / 33 kv Control Protection panels, SIMS, Synchronizing, Metering, SIP and 33kv Switchgears. News Zone - News Fri, 13 Feb 2009 17:40:47 +0100 http://www.incontrol-tech.com/index.php?option=com_content&task=view&id=123 Another successful Factory Acceptance Test ( FAT ) was achieved by inCONTROL TECH after passing all engineering criteria’s set by TNBT. Among the requirements for this project was delivery of 132 Relay Control Panels which would be then used to power up the surrounding of Wangsa Maju and Kampung Lanjut area. This substation would also be powered with 132kV and 33kV Gas insulated switchgear, 90MVA 132/33kV. News Zone - News Thu, 05 Feb 2009 16:56:29 +0100 http://www.incontrol-tech.com/index.php?option=com_content&task=view&id=122 The Malaysian Trade and Industry Organisation (MTI) annually Organizes the Malaysian Trade and Industry Recognition Award to give recognition to companies for excellence in various fields. This award will be to motivate and encourage Malaysian Companies to make every effort to achieve excellence in their products and services. News Zone - News Fri, 30 Jan 2009 10:58:52 +0100 http://www.incontrol-tech.com/index.php?option=com_content&task=view&id=120 The Construction Industry Development Board Malaysia (CIDB), is a statutory body under the Ministry of Works. Every year, the CIDB invites participation from the industry to vie for these prestigious Awards as an effort to recognize their achievements in the industry. The Malaysian Construction Industry Excellence Awards (MCIEA) is intended to be the Malaysian premier accolades for all round excellence. News Zone - News Wed, 14 Jan 2009 14:25:09 +0100 http://www.incontrol-tech.com/index.php?option=com_content&task=view&id=119 “Building partnerships through empowered people” which is the key motivating factor for inCONTROL-Tech’s strong reputation in providing a long term relationship with clients was achieved after being selected as the winner in The BrandLaureate –SMEs Chapter Awards 2008, Brand Specialty Award for Brand Innovation. The event which took place at the Grand Ballroom in Shangri-La Hotel was attended by over 1000 business representatives from various organizations. News Zone - News Tue, 06 Jan 2009 17:08:28 +0100 http://www.incontrol-tech.com/index.php?option=com_content&task=view&id=117 Yes, this was what Harvinder Singh, founder and managing director of Incontrol received for his unreserved journey towards accomplishing his dream of building a world class company in a fully localized environment. It was indeed a proud moment for him as he received this prestigious award at a presentation ceremony at the JW Marriot on 11th December 2008, the winner among three other also well-placed nominees in the technical entrepreneurs group. News Zone - News Fri, 12 Dec 2008 18:10:56 +0100 http://www.incontrol-tech.com/index.php?option=com_content&task=view&id=116 InControl-Tech now has the authority to sell all categories of the 3Com and H3C range of products and services and provide secure converged network implementation on behalf of 3Com to customers. 3Com Corporation (NASDAQ:COMS) is a leading provider of secure, converged voice and data networking solution for enterprises of all sizes. 3Com offers a broad line of innovative products backed by world class sales, services and support, which excel at delivering business value for its customers. News Zone - News Fri, 12 Dec 2008 10:51:47 +0100 http://www.incontrol-tech.com/index.php?option=com_content&task=view&id=115 The future of the substation communication now relies on this new standard IEC 61850. This communication standard revolutionaries Substation Design and brings dramatic reduction in lifetime costs of the substation. This half a day seminar which was organized by the Institute of Engineers Malaysia ( Sabah Branch ) was aimed to create awareness about this latest development. inControl Tech has delivered THREE substations with this concept in Sabah and One in Bahrain. Site Acceptance Tests have been completed successfully for two of them. News Zone - Product Thu, 04 Dec 2008 18:06:03 +0100 http://www.incontrol-tech.com/index.php?option=com_content&task=view&id=114 Cambodia is back on the map! After three decades of civil war, peace has come to this beautiful yet blighted land. And this was the chosen country for iTEC's annual company trip in 2008. iTEC took the perfect time to visit the re-birth of this nation before it becomes just another stop on the tourist merry-go-round. News Zone - News Thu, 27 Nov 2008 15:15:59 +0100 http://www.incontrol-tech.com/index.php?option=com_content&task=view&id=112 Mannheim 20th October 2008. In another bold move, iTEC has signed an agreement with ABB AG in Mannheim, Germany to become an External Channel Partner for the RTU 560 family of products. As ABB RTU 560 has one of the largest installed base in the world for power systems and is currently one of the most advance RTU in the market, iTEC will be able to leverage its strong engineering skills and panel manufacturing capability to deliver complete RTU and Gateway solutions with this Partnership. News Zone - News Wed, 19 Nov 2008 09:35:47 +0100 http://www.incontrol-tech.com/index.php?option=com_content&task=view&id=111 iTEC has been shortlisted as one of the final two Companies vying for the prestigious ‘ICT Award’ by the Construction Industry Development Board ( CIDB ). CIDB which is a statutory body under the Ministry of Works continuously looks for Companies to vie for these prestigious Awards as an effort to recognise their achievements in their respective fields of expertise. News Zone - News Fri, 14 Nov 2008 16:10:29 +0100 http://www.incontrol-tech.com/index.php?option=com_content&task=view&id=110 Shanghai, New International Expo Centre, Metalworking and CNC Machine Tool Show (MWCS), Industrial Automation Show (IAS) and Energy Show (ES) of China International Industry Fair 2008 proved to be a magnet for exhibiting firms, decision-makers, buyers and industry professionals in the fields of metalworking, machine tools, automation and energy technology. More than 1,200 exhibitors from 16 countries and regions showcased their products and solutions on a total display area of 79,500 square meters, with more than 100,000 visitors clinched business in the fields of metalworking and machine tool, automation and energy. News Zone - News Mon, 10 Nov 2008 15:47:31 +0100 http://www.incontrol-tech.com/index.php?option=com_content&task=view&id=109 Sabah Electricity Sdn. Bhd. (SESB) has taken a step forward in implementing their first IEC 61850 communication based Substation Automation System (SAS) as part of their on going process in upgrading the communication infrastructure within their substation. With the help of this new communication technology, SESB will now have a better control over their substation equipments by using this latest technology. Penalaju Sdn. Bhd. which has been awarded this project is required to deliver both primary and secondary systems for 132kV/33kV/11kV Minintod substation is also known for its trusted and long serving vendor for SESB. On the other hand Penalaju awarded the SAS and Substation Interrogation and Monitoring System (SIMS) to InControl Tech Sdn. Bhd., also known as iTEC. News Zone - News Mon, 03 Nov 2008 17:58:25 +0100 http://www.incontrol-tech.com/index.php?option=com_content&task=view&id=108 Ernst Young Entrepreneur Of The Year ( Tech Finalists )TheEDGE Newspaper, 27th Oct 2008By Edwin YapBelieving in oneself and having the confidence to be a world-beater are two key traits that have driven Harvinder Singh, founder and managing director of inControl Tech Sdn Bhd, to success. I started out by working for about 11 years in the largest multinational corporation in the power sector, says Harvinder. When I was there, I felt that we should have been able to take on more technology transfer from our principals in Malaysia but it was difficult to convince them to do so. So, when I could not convince them anymore, I decided to strike out on my own. News Zone - News Fri, 31 Oct 2008 11:17:52 +0100 http://www.incontrol-tech.com/index.php?option=com_content&task=view&id=107 Another successful Factory Acceptance Test ( FAT ) was achieved by iTEC after passing all engineering criteria’s set by TNB. This project which is to be used at the Northern Eastern Regional Control Centre (NERCC) would enable TNB to monitor and control its 33/22/11kV substations located the Eastern and also in the Northern part of Malaysia. iTEC joined venture with PSI-CNI had completed the FAT without any difficulties. News Zone - News Fri, 31 Oct 2008 10:10:41 +0100 http://www.incontrol-tech.com/index.php?option=com_content&task=view&id=106 With recent upgrading process from SCS to IEC 61850 based substation automation system (SAS) by MEW on their existing and new substations, Alba Marine substation was also been part of this upgrading activity. InControl TECH of Malaysia with joint partner Hajar Trading has been awarded with the complete upgrading of existing SCS to a new IEC61850 SAS, which is based on iTEC IEC61850 SAS solution for this substation. News Zone - News Thu, 30 Oct 2008 10:22:40 +0100 http://www.incontrol-tech.com/index.php?option=com_content&task=view&id=104 After successfully completing and going through Factory Acceptance Test, iTEC made its first achievements in the Wind Farm Industry. Among task which was carried out was designing of the panels, manufacturing, supply and factory test of relay panel and lastly SCADA Panel. News Zone - News Thu, 16 Oct 2008 15:24:03 +0100 http://www.incontrol-tech.com/index.php?option=com_content&task=view&id=103 Control system for the northwest region of the Federal Grid Company – The Russian joint venture OOO PSI Energo, which specializes in energy control technology, has been contracted by the JSC Federal Grid Company of Unified Energy System (JSC FGC UES/Russian: OAO FSK EES) to deliver the new control system for the high voltage network in the northwest region. The northwest region is one of eight network regions controlled by FSK EES and includes the north of Russia from St. Petersburg across the Finnish border to the Urals. The total value of the order is 17 million euros; it will serve as a pilot project for the Russian market. Read More >> (http://www.psi.de/en/no-cache/psi-pressevents/press-release/article/psi-erhaelt-grossauftrag-aus-der-russischen-energiewirtschaft/) News Zone - News Thu, 25 Sep 2008 10:22:48 +0100 http://www.incontrol-tech.com/index.php?option=com_content&task=view&id=91 The Sultan Mahmud Storage Hydro Electric Power Plant (HEPP Kenyir) started operation in 1987 and is located North-East of Peninsula Malaysia in the State of Terengganu. Tasik Kenyir (the lake reservoir) is the largest man-made lake in SE-Asia with a size of 370 km2, a catchment area of 2,600 km2, with 340 islands and is part of the Taman Negara National Park. News Zone - News Thu, 19 Jun 2008 11:28:33 +0100 http://www.incontrol-tech.com/index.php?option=com_content&task=view&id=101 Ernst Young recently announced the 14 nominees for the Malaysia Ernst Young Entrepreneur of the year ( EOY ) 2008 awards. Mr. Harvinder Singh, Managing Director of inCONTROL Tech was nominated for the Technology Entrepreneur of The Year Awards. inCONTROL Tech ( iTEC ) has made successful inroads internationally by winning projects amidst global competition in Bahrain, Australia, Algeria, Thailand, Indonesia, Vietnam and Sri Lanka and is well on course to become a Malaysian MNC in its own right with subsidiaries in Thailand, Bahrain and India with plans for more in the future. The top nominees will vie for four main category awards. Emerging Entrepreneur of The Year, Technology Entrepreneur of The Year, Women Entrepreneur of The Year and Master Entrepreneur of The Year 2008. News Zone - News Fri, 19 Sep 2008 10:39:08 +0100 http://www.incontrol-tech.com/index.php?option=com_content&task=view&id=96 In line with the iTEC's corporate program for the year, a charity drive was identified and organised by a visit of our staff to HOPE Worldwide Kuala Lumpur, an organisation whose mission statement Bringing Hope, Changing Lives coincides with iTEC's vision of giving back to society. News Zone - News Wed, 13 Aug 2008 12:31:43 +0100 http://www.incontrol-tech.com/index.php?option=com_content&task=view&id=92 We are pleased to announce the completion of the inCONTROL TECH(iTEC) office in Chennai, India. This is part of the ambitious globalization of the iTEC group which now spans over 4 regions and serves more than 50 customers in 10 countries. The number of customers as well as countries covered by iTEC are growing rapidly and to cope with the additional projects, iTEC has embarked in an engineering office in Chennai. This office will cater for an additional 30 engineers for the group. News Zone - News Thu, 19 Jun 2008 11:39:58 +0100 http://www.incontrol-tech.com/index.php?option=com_content&task=view&id=100 inControl Tech recently held a training session with University Putra Malaysia (UPM). The talk focusing on final year Engineering students was part of our College and University coaching programme aimed at creating awareness among undergraduates what the Industry is like. Students were given an overview on the SMART Tunnel Project and how important it is to stay tuned with the growing engineering industry News Zone - News Tue, 02 Sep 2008 12:06:10 +0100